Essential Safety Guidelines for Tractor Operations in Farming

1. Prevention Points for Rollovers and Falls (Entering/Exiting Fields):
   • “On slopes, always drive straight, up or down.”
   • “Lower the front attachment when stopping on slopes.”
   • “Do not go up or down slopes greater than 15° or 4 times the tractor’s height.”
   • “Use ramps or other aids when entering or exiting fields with differences in level.”
   • “Inspect and secure any attached equipment.”
2. When Leaving the Machine:
   • “Stop the engine and engage the parking brake before leaving.”
   • “Check surroundings to ensure safety.”
3. Inspection Time:
   • “Perform inspections before and after work.”
   • “Always wear gloves for safety.”
   • “Check the machine on flat ground for a stable inspection.”
4. Key Points for Road Operation:
   • “Use lights and signal devices when traveling on public roads.”
   • “Keep a 20 cm margin between the tractor and other vehicles.”
   • “Drive at a speed that ensures safety, considering traffic and weather conditions.”
5. Importance of Maintenance:
   • “Always perform maintenance checks before operation.”
   • “If any part shows signs of damage or wear, contact a dealer for support.”
6. Prevention Points for Rollovers and Falls (During Operation):
   • “Always use a tractor with a certified safety frame.”
   • “Wear a seatbelt and helmet.”
   • “Operate on even ground whenever possible.”

Essential Safety Guidelines for Combine Harvester in Farming

1. When Starting and Working:
   • “Check surroundings carefully before starting.”
   • “Avoid having people close by during operation.”
   • “Before starting, inspect safety features and ensure no objects are on the machine.”
2. When Moving on Roads:
   • “Be cautious of obstacles when moving.”
   • “Avoid excessive speed and drive slowly.”
   • “Engage hazard lights to ensure visibility.”
   • “Avoid traveling on soft or muddy roads to prevent accidents.”
3. When Leaving the Machine:
   • “Ensure engine is stopped, and apply parking brake.”
   • “Secure the area to prevent unintended movement.”
4. Inspection Time:
   • “Turn off engine before inspecting.”
   • “Check blades and moving parts after stopping.”
   • “Wear protective gloves and other gear when inspecting.”
5. Manual Work:
   • “Be careful not to get caught in machinery when loading or unloading.”
   • “Remove any crop residue from the machine before handling it manually.”
6. Maintenance is Essential:
   • “Always check the machine before starting work.”
   • “Consult service representatives for additional assistance if needed.”
7. Caution Regarding Fire:
   • “Combine Harvesters are prone to fires due to the nature of work. Ensure preventive measures.”
   • “Key points for preventing fire hazards include:”
     • “Avoid overloading the machine.”
     • “Ensure air intake is clean and not clogged.”
     • “Maintain oil levels to prevent overheating.”

Rice Transplanter Safety Essentials

A. Safe Rice Transplanting Practices

1. Load Safety Guidelines
   • Before Loading:
     • Avoid overloading, and secure loads firmly.
     • Use a helper to guide you during loading if possible.
   • On Slopes:
     • Be cautious on slopes; maintain stable control.
     • Do not attempt loading/unloading on steep slopes without assistance.
2. Field Entry and Exit Guidelines
   • Field Exit Precautions:
     • Never abruptly leave the field with machinery.
     • Use assistive functions, if available, when traversing rough terrain (such as speed control).
3. Movement Guidelines
   • While Moving:
     • When moving equipment by truck, secure firmly and avoid public roads if possible.
     • Apply the parking brake on the truck during transport.
     • Unload on a stable, level surface when arriving at the destination.
4. Prevention of Slipping and Falling
   • Footwear and Environment:
     • Wear shoes with proper grip, especially in wet or muddy conditions.
     • Clear any obstacles on steps and platforms.
   • Steps and Platforms:
     • Avoid rushing; take care to avoid slipping or tripping.
5. Operation Guidelines
   • While Operating:
     • Maintain a safe distance from the road shoulder.
     • Do not make sharp turns at high speeds, especially near edges.
     • Avoid excessive lateral loads (sideways pressure on machinery).
6. Leaving the Machine
   • When Exiting the Machine:
     • Always set the parking brake and turn off the engine.
     • Ensure the vehicle is on flat ground and in a stable condition before exiting.
7. Inspection Guidelines
   • Regular Inspections:
     • Conduct thorough checks on fuel, oil, and all parts before starting operations.
     • Use protective gloves and avoid contact with rotating machinery during inspections.

B. Maintenance is Essential

• Regular maintenance is crucial for safety and efficiency.
• Consult your dealer if you have any issues.
• Always handle fuel and oil with care.

Essential Safety Guidelines for Agricultural Drone in Farming

Requirements for Conducting Drone Operations

• Obtain an Operator Skill Certification from a Designated Training Facility

• To use Kubota agricultural drones, you must attend training at a Kubota Group-designated facility and acquire an Operator Skill Certification.
• Training fees may apply, and operations are limited to those with proper certification.

• Annual Inspection at a Designated Maintenance Facility

• Drones must undergo regular maintenance once a year at an approved service center.
• Details on designated maintenance centers can be found on the linked site.

Precautions Before Starting Drone Operations

1. Wear protective gear: helmet, safety goggles, and mask.
2. Do not operate drones in areas with wind speeds exceeding 5 m/s or near power lines and prohibited zones.

Ensure Safe Distance and Visibility

1. Maintain a safe operating distance from obstacles.
2. Ensure clear visibility of the drone at all times.
3. Verify the drone’s position and orientation within the safe operating range.

Fly Parallel to Obstacles

1. Avoid flying near power lines or any prohibited areas.
2. Prevent chemical drift by reducing speed early.